Precautions for using agricultural water hoses
Time:
2020-09-03 14:43
1. Cleaning: After using the hose, it is necessary to clean it. For some hoses transporting foam, it is necessary to wash and maintain the adhesive layer in detail. In order to remove the grease from the water hose, you can wash it with warm water or soap. For frozen water hoses, the first step is to use it to melt them, and then clean and dry them. Water hoses that have not been dried should not be rolled or stored.
2. Laying: When laying water hoses, avoid sharp objects and various oils. When vertically laying water hoses towards high places, use water hose hooks. When laying water hoses through traffic arteries, use water hose protection bridges. When passing through railways, water hoses should pass through the tracks to prevent them from being crushed by wheels and being connected to water supply.
3. Connection: When the water hose is connected to the water hose interface, a layer of soft maintenance material must be placed on it, and then it should be tightly tied with galvanized iron wire or a pipe clamp.
4. Application: When using a water hose, a low-pressure resistant hose should be connected to a location close to the water pump. The filled hose should be prevented from changing or suddenly bending, and the hose interface should also be prevented from being damaged by collision. And it is important to be aware that during the scorching summer season, when the water supply needs to be suspended on the fire site, in order to prevent the water hose from freezing, the water pump needs to operate slowly and maintain a small water output.
Previous
Previous
